Price elasticity in the agri-food sector:
Estimate the cost of a rate increase before negotiating

A manufacturer that raises its list price does not set the price on the shelf. Between the negotiated list price and the displayed price lie the retailer, its markup, and its promotions. What is measured is the price elasticity of each product, retailer by retailer, at the regular price excluding promotions.

The same product does not have the same price flexibility from one retailer to another, because each retailer assigns it a different role. The same price increase can also result in very different price increases on the shelf, depending on whether the retailer maintains its “ Gross margin ” or its margin in euros.

In 2026, food manufacturers demanded an average increase of 3.5% from supermarket chains. At the conclusion of negotiations, the average net price rose by only 0.05%.

A year earlier, the gap was already clear: 5.7% requested, 1.5% granted.

These reports make one simple point: A rate increase isn't decided unilaterally—it is negotiated, it can be reduced, and the negotiated rate is not the price the consumer pays.

Isometric stores connected by price curves, on a purple background

The industrial rate does not determine the shelf price

In a B2B2C supply chain, the manufacturer sells to the retailer at a transfer price. The retailer then sets the price displayed in stores and online. Consumers respond only to this second price—the one shown on the label—even though the manufacturer has no control over it.

+0,05 %

Increase requested by manufacturers in 2026: +3.5%. Final net price increase effective March 1, 2026, for all products.
(Commercial Negotiation Observatory, April 23, 2026)

A 3% increase in the wholesale price can therefore result in a 0%, 1%, or 3% increase on the shelf. It all depends on how much the retailer passes on, how much it absorbs into its margin, and how much it offsets elsewhere—through a promotion or another product in its lineup.

The relevant question for a manufacturer is therefore not, “By how much can I raise my price?”

The question is framed differently: How much volume will I lose if the shelf price goes up by a certain amount, store by store, and what margin will I retain once the negotiation is complete?

Average elasticity is not enough

A calculated elasticity across the entire range is rarely the deciding factor.

It varies depending on the product, its position on the shelf (a budget-priced item does not respond the same way as a leading brand), the retailer, and the season. The average masks the products where a price increase results in only a small loss of volume and those where it results in a significant loss.

Counterintuitive: The same product does not have the same price elasticity from one retailer to another. It is not the consumer who changes; it is the role that the retailer assigns to the product.

If it treats it as a benchmark product, it will absorb the price increase or negotiate it down. If it's a shelf-filler product, it will pass on the increase, and sales volume will be less affected.

Our take: A manufacturer who knows each retailer's list of key products knows in advance where price increases will be most hotly contested.

To measure it accurately, you need at least two years of price history and average weekly sales data by SKU and by retailer. You also need the variables that explain the remaining demand: seasonality, holidays, competitors’ promotions, and weather for certain categories.

Without them, the model attributes the price increase to what is actually a month of strong demand.

Calculating price elasticity lays the foundation for the measurement.

Separate the regular stock from the sale items

An increase in volume during a promotion says nothing about the product's price sensitivity at the regular price. We need to distinguish between three things: the baseline—that is, the sales that would have occurred without the promotion; the promotional effect; and the actual incremental volume.

Part of this volume often comes from another product in the line, which experiences a decline in sales at the same time (cannibalization). Another part is simply a shift in sales from one week to the next.

Without this distinction, a price increase appears less costly than it actually is. The promotional volume inflates apparent demand, and the manufacturer makes a decision based on a signal that does not exist at the normal price.

34 %

Maximum discount on a food product promotion, not to exceed 25% of the annual volume sold under the promotion, through April 15, 2028.
(Egalim Act of April 14, 2025, DGCCRF)

The regulatory framework is also more restrictive in the food sector. The Egalim Act regulates promotions for these products, which limits promotional leverage and makes the baseline all the more important.

Simulate the impact, store by store

There are three possible scenarios. The pass-through is complete when the shelf price matches the list price, and partial when the retailer absorbs part of the increase.

It's no good when the retailer keeps everything—which also happens the other way around, when prices go down.

Each of these scenarios results in a different break-even point for the manufacturer. And even a “full” pass-through does not mean the same thing from one retailer to another.

Example with figures
Illustrative example: the same price increase, two prices on the shelf

This calculation is an example created for the article; it is not based on actual customer data. A product is sold on the shelf for €2.00 (excluding tax), with a cost of goods sold of €1.30: the retailer earns €0.70, or 35% Gross margin.

The manufacturer receives a 4% increase on its price: the wholesale price rises to €1.352. If the retailer maintains its 35% Gross margin , the retail price rises to €2.08, a 4% increase.

If it maintains only its margin in euros—€0.70—the price rises to €2.05, or +2.6%. The same price increase therefore results in a +2.6% or +4% increase on the shelf, depending on the retailer’s margin policy.

Simulating the impact without knowing how each retailer calculates its margin means getting the elasticity wrong before you even start.

Team Booper, an illustrative example.

A simulation that shows only the volume lost on the industrial side does not convince the buyer.

The distributor calculates profit margins by category. Therefore, for each scenario, we need to quantify both sides: the manufacturer’s volume and margin, and then the retailer’s margin.

A good simulation highlights the areas where a price increase comes at little cost in terms of volume. That is where a price increase is justified, and that is where it is worth focusing trading activity.

The platform's simulator compares the estimated effects of various price levels on sales, inventory, and margins before a price is finalized.

What a tool must demonstrate before being selected

A forecast accuracy figure announced without its metric or scope doesn't tell us much.

Our tip: Ask for a demonstration using one of your products, store by store, and see if the tool can distinguish between regular stock and promotional items. That’s where most models give themselves away.

The issue of data often causes more problems than anything else. Many manufacturers have market data under contract but aren't sure whether that contract covers their use of the data in a third-party tool. It's best to ask this question before exporting a file for the first time.

Frequently Asked Questions

By measuring the price elasticity of each product, store by store, based on the regular price (excluding promotions).

Then, by simulating various levels of ripple effects at the store level, taking into account the manufacturer's volume and margin and the retailer's margin for each.

Because the retailer is protecting its price image and its margin by product category. In 2026, food manufacturers requested an average increase of 3.5% and secured a 0.05% increase in the net price (Observatoire de la négociation commerciale).

A raise that is justified with specific examples, including quantified effects on both sides, is easier to defend than a uniform raise.

There is no single useful figure. Price elasticity varies depending on the product, its position on the shelf (entry-level or leading brand), the retailer, and the season.

A category average can serve as a benchmark, not a basis for negotiation.

At least two years of price and average weekly sales data, by SKU and by store chain, along with the variables that account for the remainder of the demand (season, holidays, competition, weather).

We need to isolate them, not ignore them. A promotion inflates apparent demand and makes a price increase seem less costly than it would be at the regular price.

The baseline, the promotional effect, and the actual incremental volume are measured separately.

Speak their language: the gross margin by category. For each pricing scenario, show the impact on their sales and margin—not just on your volume.

Focus your negotiations on the products where a price increase results in only a small loss of volume.

Sources

  • Trade Negotiation Observatory, 2026 Report, press release dated April 23, 2026: average wage increase of 3.5%, net price increase of 0.05% as of March 1, 2026, approximately €42 billion in revenue.
  • Trade Negotiation Observatory, 2025 Report, April 22, 2025: requested increase +5.7%, achieved increase +1.5%.
  • Egalim Act of April 14, 2025, regulations on promotional offers, DGCCRF fact sheets:economie.gouv.fr

Last updated: October 25, 2026.

See also in this feature

‍

Articles
similar
Demand curve above a certain radius; illustration of the measurement of price elasticity from a catalog
October 24, 2026
Measuring Price Elasticity in Your Catalog: Excel, a Data Team, or a Tool?

Measuring price elasticity for a catalog does not involve any complex calculations. The challenge lies in isolating promotions, out-of-stock situations, and cross-product effects, and then keeping track of thousands of elasticity values and linking them to margin.

Excel is enough to understand how the mechanism works for a few products. A data team builds good models but struggles to scale them. A dedicated solution covers the entire catalog on an ongoing basis, provided it proves its value using your own data.

Read the blog post
Percentage of glass broken by a downward curve: break-even point—margin elasticity
August 30, 2026
Price Margin and Price Flexibility: How Low Can You Go Without Undermining Profitability?

A price reduction applies to all existing sales, not just new sales. The additional volume must offset this discount granted to everyone, and the threshold to be reached rises even faster when the “ Gross margin ” is low.

A price reduction is structurally more expensive than a price increase: at a 25% Gross margin, a 10% price reduction requires an elasticity of 6.7, whereas a 10% price increase requires only 2.9. Most price reductions are therefore justified by pricing strategy or inventory considerations and should be treated as an investment.

Read the blog post
A store aisle with two price tags tested in two different areas
August 28, 2026
Testing Your Prices Without Losing Customers: What a Test Should Prove

Companies rarely experiment with their prices because the risk of failure is obvious, while the cost of doing nothing is not. Customers mainly focus on benchmark products: the real question isn't whether they are price-sensitive, but which products they are sensitive to.

A useful test starts with a written hypothesis, compares test stores with control stores, and is evaluated over a full purchasing cycle, within the category margin. A price decrease is tested with greater caution than an increase, because it is difficult to reverse and may trigger subsequent discount announcements.

Read the blog post
Ready to
 booster
What about your profit margins?

The pricing intelligence solution for retail leaders. Accuracy, speed, and controlled margins.

Let's discuss your pricing challenges
‍
‍