ROI of a pricing solution: 
Time savings or profit margins?

A business case for a pricing solution combines two types of return on investment. Friction ROI refers to the hours saved: easy to measure, but capped by the size of the team. Decision ROI refers to the margin points gained: slower to quantify, but with no upper limit.

Margin gains are measured against a control group, never by comparing before-and-after figures. Before the results are clear, the percentage of recommendations that are actually implemented indicates whether those gains will materialize. The test every business case must pass: without the time savings, is the project still profitable?

One executive explains that he hardly ever responds to his emails anymore: his staff handles them, and he reviews them. The benefit is real, immediate, and understood by everyone.

Apply that same promise to pricing, and the logic falls apart. A tool that saves hours and one that boosts profit margins aren't measured the same way.

To confuse the two is to endorse a project based on one promise and judge it based on another.

Two dials side by side: an hourglass for time, an upward curve for the margin

What ROI can you expect from pricing software?

The ROI of a pricing solution can be broken down into two distinct categories: the time saved by the team—which we call “friction ROI”—and the margin gains achieved through better pricing—the “decision ROI.”

In a properly executed deployment, BOOPER has observed an increase in profit margin ranging from +0.5 to +3 points within a few months. It is this figure—not the time saved—that determines the business case.

The two ROIs, calculated separately by Booper
-70% to -90%reduction in pricing preparation time: the ROI of friction
+0.5 to +3 ptsmargin in just a few months: the ROI of the decision
4,000retail locations managed

Source: Booper figures, Business News, September 15, 2026.

A retailer's position within the price range depends on its starting point: a retailer that still manages its prices using Excel earns more than one that is already equipped with the necessary tools. It also depends on the quality of the product database and the actual pricing flexibility.

To learn more about the softwareproviders, see our pricing software comparison; for the calculation method, see the fact sheet Markup ; for theAI-powered price optimization mechanism, see the product page.

Two types of ROI that are fundamentally different

The ROI from friction is calculated by multiplying the number of hours per week by the total cost. It becomes evident as early as the first month and immediately resonates with the executive committee.

The ROI of a decision is measured in margin points: a price set two cents higher where the customer isn't comparing prices, or a price reduction implemented three weeks earlier. It takes one to four quarters to become clearly apparent.

The ROI from friction is capped, but the ROI from decision-making is not

Time savings end where the team's payroll ends. Margin gains, on the other hand, are calculated based on revenue.

Illustrative example; figures rounded. A company with €200 million in revenue and a four-person pricing team earning €75,000 each: €300,000 in total payroll.

Freeing up 30% of their time is worth 90 k€ per year, and never more than 300 k€—even if the team were eliminated. A half-point margin on 200 M€ is worth 1 M€. These two figures are in completely different leagues.

Friction-based ROI is certain; decision-based ROI is probabilistic

That is why the first is almost always the only one included in the business case: it stands up to scrutiny in committee without faltering. The second involves flexibility, scope, and duration, and is subject to a myriad of external factors.

We all know how it goes: a project is signed off on based on hours, evaluated eighteen months later based on profit margins, and no one comes out ahead.

1 in 5

66% of executives report significant productivity gains thanks to AI, but only about one in five has actually achieved their return on investment (ROI) goals.
(IBM, The Race for ROI, 3,500 executives in ten countries across Europe, the Middle East, and Africa, including France; survey conducted in September 2025; published on October 28, 2025)

This figure does not mean that AI is useless. It means that two-thirds of organizations see an impact, but only a minority translates that into a return on investment.

Friction ROI: Easy to Measure, Easy to Overestimate

There are three common mistakes made when calculating hours. Counting hours that have been eliminated rather than reassigned. Forgetting the time the tool itself consumes: setting it up, monitoring it, and resolving borderline cases.

And billing administrative tasks at an executive's hourly rate, which quietly inflates the bill.

Our Position
An hour saved isn't a euro earned

In a pricing team of three or four people, no one will be let go. The hours freed up are therefore only as valuable as what the team does with them.

Converting them to euros in a business case means including a line item that will never be collected. We prefer to express them in terms of volume: how many categories will the team finally be able to review each quarter?

Booper Team, retail pricing since 2014

The true value of the time saved cannot be quantified. A team that spends the entire week producing files does not have time to test, simulate, or challenge a rule. The time saved is a prerequisite for achieving the second ROI—not an ROI in and of itself.

Decision ROI: Hard to Measure, Yet the Only One That Really Matters

The margin gain stems from four categories of decisions. They do not occur at the same rate, and this is a point that business cases almost always overlook.

Errors that no longer occur are listed first: a price entered with a misplaced decimal point, a rounding error that falls below the “ below-cost resale threshold,” and a promotion that remained active after the transaction.

This gain is not reflected in the tables, since it relates to events that did not occur.

Next comes the breakaway at just the right moment. A three-week lead heading into the end of the season is often worth more than five points at the finish line, and the lead builds easily: it’s a good track for a driver.

Less destructive promotions take more time: you need to measure actual incremental growth and cannibalization, not apparent volume.

The best-positioned shelf-back prices make up the largest and slowest-moving segment. Profits are generated in small increments across thousands of SKUs that customers do not compare.

Our belief: Announcing an increase in shelf space at the first monitoring committee meeting is like promising what will come last.

How to Measure a Margin Increase Without Beating Around the Bush

Comparing the before and after proves nothing. Between those two periods, there was a season, weather conditions, inflation, and a competitor that opened or closed.

Attributing the discrepancy to the tool is a matter of belief. And since the discrepancy can also work against the tool, this method produces just as many false failures as it does false successes.

The control group, the only attributable measure

Two comparable populations over the same period, one governed by the new system and the other left under the previous system. The difference between the two is the only figure that can be attributed.

The scope, metrics, and review date are set before the project begins. If chosen after the fact, they guarantee a positive result that no one will believe.

The margin is shown next to the price figure on the same table: a gain achieved by distorting the perception of price is a liability. This is the subject of our article on pricing KPIs in a retail dashboard.

1 out of 2

More than half of retailers and manufacturers of consumer goods do not formally measure the return on investment of their AI projects. While the figure is based on a small sample, it gets to the heart of the matter: companies are investing before they know how to measure results.
(BCG and The Consumer Goods Forum, survey of 39 executives, June 2026)

A claim that starts at more than +3 points warrants a request to see the measurement protocol. A claim without any range raises the same question.

What should you look for before the margin is legible?

Between the third and twelfth months, the hours are there, but the profit margin isn't quite there yet. This is the moment when confidence in the project is put to the test.

However, there is one indicator that signals very early on whether the margin will materialize: the percentage of price recommendations that are actually implemented. If the team adjusts or ignores the majority of the suggested prices, the ROI from the decision will not materialize, regardless of the model’s quality.

Conversely, a reasoned rejection is not a failure. It is often a business rule that is missing from the system, and correcting it drives adoption faster than training.

At Booper
Read the adoption before the margin

The platform's dashboard displays the adoption rate of recommendations alongside the estimated margin impact, along with the change from the previous week.

This is the metric we monitor with the teams during the first few months, when the margin isn't yet clear.

Building a business case that still holds up twelve months later

The Crossed-Out Line Test

Take the business case you were given and cross out all the lines that relate to time saved. Look at what's left.

If it’s still a profitable project, you’re buying a decision-making tool, and the time saved will be a bonus. If there’s nothing left, you’re buying a productivity tool: in that case, you’ll need to compare it to other productivity tools, with a different budget.

The Three Lines Nobody Writes

First, the cost of data: ensuring the reliability of the product database and keeping product comparisons with competitors up to date—the true prerequisite highlighted in our article on data quality, the “glass ceiling” of AI pricing.

Next, there’s the cost of maintenance: a body of rules becomes increasingly cumbersome and contradictory if no one reviews it. Finally, there’s the exit cost, which is negotiated at the time of signing and factored into the initial business case.

The Right Reading Perspective

Friction ROI becomes apparent after three months, while decision ROI becomes apparent after two to four quarters. Announcing both at the same time is a recipe for disappointment at the first monitoring committee meeting.

The same principle applies to every pricing decision presented to the committee: costed options and a range, as we detail when defending these pricing decisions before senior management.

The approach that works: announce the timelines—three months, six months, and twelve months—and communicate them from day one. These milestones are established during the scoping phase, the first stage of a pricing tool deployment project.

See also in this feature

FAQ

By distinguishing between two benefits: the time saved, valued at the full cost of the position actually involved, and the margin gain, expressed in percentage points and measured against a control group over a full cycle.

To the acquisition cost, add three items that are often overlooked: data reliability, rule maintenance, and exit costs.

At BOOPER, the observed improvement ranges from +0.5 to +3 margin points in just a few months, with a 70 to 90 percent reduction in the time required to prepare prices.

The position within the range depends on the starting point, the quality of the product benchmark, and the actual pricing flexibility.

Public example: At Barbotteau, a retail group in the French Caribbean, a pilot program in part of the supermarket resulted in a 1-point increase in the “ Markup ” rating over the course of a quarter, before being rolled out company-wide.

The time saved becomes apparent within three months. It takes two to four quarters to see an increase in profit margin.

Be wary of relying on a single average: a meaningful ROI is measured against a control group, not by comparing before-and-after results.

The time saved becomes apparent after three months. The increase in profit margin takes two to four quarters—the length of a full cycle.

Of the two, the best leading indicator is the percentage of price recommendations that the team actually implements.

Because the season, the weather, inflation, or a competitor have changed at the same time as prices. This method produces just as many false failures as it does false successes.

Only a control group, defined before the start of the study, allows the difference to be attributed to the tool.

Not automatically. The time savings are limited by the size of the team; the margin gain is calculated based on revenue.

Having the time available remains a prerequisite: a team that spends the entire week producing files does not have time to test or run simulations.

Data (product catalog, product matching with competitors), rule set maintenance, and exit costs.

Added to this is a methodological error: valuing managerial tasks at the hourly rate of an executive.

‍

Articles
similar
A grid of clear lines that extends into a scatter plot connected by curves
November 17, 2026
AI or Business Rules: When Is AI Pricing Worth the Investment?

Well-defined business rules are often sufficient for a narrow, stable, and loosely interdependent product catalog. AI becomes cost-effective when decisions number in the thousands, products influence one another, and price sensitivity varies.

But you still need a usable sales history. In most cases, the right answer is a hybrid approach: the rules set the framework, and the model optimizes within it.

Read the blog post
Data flows from multiple sources pass through three stages before reaching human validation
November 13, 2026
Pricing Manager and AI: What the Machine Does, What the Expert Decides

AI handles the volume at every stage of the data journey: collection, product matching, verification, forecasting, and simulation. The expert selects competitors, resolves ambiguous cases, provides context, formulates the strategy, and makes decisions.

At Booper, Booper Mind makes suggestions, MPS monitors, and the user decides. Knowing how to interpret elasticity and question a forecast is more important than knowing how to code.

Read the blog post
Scales of Justice placed on a price dashboard, between three colored areas
November 11, 2026
Algorithmic Pricing: Where Is the Legal Line for a Retailer?

Dynamic pricing is permitted in France. Personalized pricing based on automated decisions is allowed, but customers must be notified of it. Algorithm-based price-fixing remains prohibited, even in the absence of contact between competitors.

The strongest safeguard for a retailer: being able to say, for each price, which rule generated it, what data it was based on, and who approved it.

Read the blog post
Ready to
 booster
What about your profit margins?

The pricing intelligence solution for retail leaders. Accuracy, speed, and controlled margins.

Let's discuss your pricing challenges
‍
‍